Why settle for traditional non-chlorine shock when just ounces of E-Z Spa OM™ only “once-a-week” also clarifies and softens water, relieves balance anxiety, eliminates chemical odors and foaming, and inhibits hardness scaling … all with the economy of monopersulfate!

Benefits: Use only ounces “once-a-week” to provide clarity, balance stability and soothing water for bathing. Replaces need for monopersulphate (non-chlorine shock), foam out, clarifier, scale preventative, and pH lock (pH perfect), and chemical filter cleaners.

Advantages: Economical, balanced, dependable … “once-a-week” simple. Keeps water beautifully clear. Eliminates chemical odor and foaming. Inhibits hardness scaling on equipment and spa surface.

Spoil yourself with E-Z Spa™ SIMPLICITY:
See E-Z Start Kit™ for our full line of spa products.

Start-Up (Fresh water fill)
1) Sequester metals if applicable. It is best if no metals are present in spa water. We recommend EZ Pre-Start™ to remove metals and phosphates.
2) Balance spa water to: 7.2 – 7.6 pH, 250 – 400 ppm. Calcium Hardness, 80 – 120 ppm. Total Alkalinity.
3) Initiate start-up for any spa size with 2 to 3 oz. dichlor shock (EZ Boost™) introduced with spa pump running.
4) Next, dose with 1 oz. (2 tbsp.) of E-Z SpaOM™ per 100 gallons of water by simply dissolving product in circulating water near any spa jet.
Note: Wait minimum of 1 hour before entering tub.
5) After 48 hours, pressure rinse the filter cartridge. Chemical soaking is not required.
6) Test for 1.0 or higher “Total Chlorine” level with any 5-way chlorine test strip.
It is not unusual for pH to drop slightly after dosing. Buffers will adjust pH back up typically in 24 – 48 hours. Test for pH before dosing as opposed to after.

Routine Maintenance

In conjunction with OZONE or MINERAL PURIFIER, use 1 oz. (2 tbsp.) of E-Z SpaOM™ per 200 gallons once-a-week for typical spa usage; and use minimum of 1 oz. of Dichlor (EZ Boost™) per 350 gallons weekly, slightly more E-Z SpaOM™ for heavier use. Wait at least 1 hr. for chemicals to circulate before entering tub. E-Z SpaOM™ and sanitizer may be added simultaneously.

E-Z SpaOM™ also makes spa water care simple and dependable without ozone or mineral purifiers. Just increase the E-Z Spa dosage to 1 oz. per 100 gallons of spa water and proceed with the same routine maintenance instructions above.

Test weekly and after heavy use for 1.0 or better “Total Chlorine” and balance with a 5-way chlorine test strip. Adjust weekly dosage or spot dose as needed. Have water tested monthly for balance by an Authorized Dealer. Pressure rinse filter cartridge every 2 weeks or as needed to maintain clear water.